User's Manual

2-29
The greyed out options are not available with this printer. The available options
are as follows:
•
Setup AppleTalk... - Allows the printer’s AppleTalk network name and
zone to be set. Selecting a new AppleTalk name will allow users of
multiple printers to give each printer a distinctive name on the network.
• View Error Log - Shows a log of any PostScript errors experienced by the
printer.
•
Setup TCP/IP & NetWare... - Allows TCP/IP and NetWare settings to be
made for the printer. This allows another configuration option for these
settings besides the printer’s front panel or WebAdmin.
•
Configure Status Page... - Turns the printer’s automatic Network Status
Page on or off.
Online Driver Software Updates
The Elite 21 Series Macintosh software includes also installs a file called Elite
21 Updater into the Elite 21 Folder on your hard drive. This Updater is a utility
which automatically checks GCC’s web site for newer driver software and
installs the new software onto your system as needed. You should not need to
run this Updater during or immediately following the initial software installation
onto your Macintosh. You may wish to run the Updater periodically to check for
software updates for the printer. This updater requires an Internet connection,
so be sure that your Macintosh is setup for Internet access before running the
Elite 21 Updater utility.