COMMODORE MULTI-CAM MODULE FOR SELECT GM VEHICLES The COMMODORE will allow the addition of a reverse camera, two blind spot cameras, and one front view or trailer camera in vehicles equipped with the 8” screen. Compatible build codes: 105 and 106. Incompatible build codes: 103, 104. IOA, and I0B. Build codes can be found on a silver sticker either in the glove box or in the trunk near the spare tire well. 2.
Multi Camera Input Interface for select General Motors Vehicles | Not Used | Reverse Camera | Model Year | Not Used [IPSWICH DIP switch Functions: 1. Not Used 3. «Leave Up Model Year «Up for 2015-2016 2. Reverse Camera 4, Not Used «Leave U « Up when vehicle has factory equipped reverse camera « Down when you are installing an aftermarket reverse camera «Down for 2017-2019 1. Set the DIP switches for your application based on the functions listed above.
Accessing Trailer Camera (Input 3) when in Reverse Once the vehicle is placed in reverse, and the reverse camera is visible, press and hold the “Back” button for three seconds (Fig. C) to access the Trailer Camera. Accessing User Interface Press and hold the “BACK” button (Fig. C) for three seconds to enter the camera menu. Press OK to accept the terms and continue. Use the touch screen to select the desired view. Press the “BACK” button to return to the previous screen.
Multi Camera Input Interface for select General Motors Vehicles Installer Setup Fig. F 1. Adjustments to the dynamic curve lines can also be made from this menu (aftermarket cameras only). 2. Third camera in 3-way split view can be switched between inputs 3 and 4. = til R | 1 EET PRT Aen Rr re | Settings Display CAMS in Multi cam View £4 Ld Doe Adjustment of Dynamic Parking Lines 1. These icons adjust the position of the lines on the screen. 2. This icon changes the appearance of the lines. 3.
