Full Product Manual

CFR), Fall Protection Systems Criteria and Practices
– 1926.502.
10.Check local building code to ensure compliance in
your area, as local building codes may vary.
Code Approvals
• Complies with AC-188 Acceptance Criteria for Roof
Underlayments
ICC ESR-3509.
• Meets the requirements of Florida Building Code,
Approval #FL16038.1-R0
• Complies with ASTM E108/UL 790 for use in
the installation of Class A asphalt glass ber mat
shingles and Class C asphalt organic felt or metal
shingles
• Meets ASTM D226 physical requirements of Type I
and Type II (No. 15 asphalt felt)
Precautions and Limitations
• Consistent with good roong practice, always wear
fall protection when working on a roof deck.
• Slippery when wet or covered by frost, debris or
dust.
• Do not fold over the roof edge unless the edge is
protected by a drip edge, gutter or other ashing
material.
• Check with the manufacturer of the metal roong
system for any special requirements when used under
metal roong. Do not install directly under roof
coverings especially sensitive to corrosion, such as
zinc, without providing proper ventilation.
Performance Properties
Property Grace SYN 15™ Test Method
Color Black
Weight 20 lbs (10 sq roll)
Tear strength MD 36 lbs; CD 36 lbs ASTM D4533
Accelerated aging Pass (no damage, cracking, chipping) ICC-ES AC48
Ultraviolet resistance Pass (no peeling, chipping, cracking, aking) ICC-ES AC48
Water ponding Pass (no percolation) ASTM D779
Pliability Pass (no cracks) ASTM D226
Water transmission Pass ASTM D4869
Tensile strength MD 66 lbs; CD 49 lbs ASTM D828
Thickness 7 mils ASTM D3767
Product Data
10 sq Roll
Roll length 250 ft (76.2 m)
Roll width 48 in (1.05 m)
Roll size 1,000 ft
2
(92.9 m
2
)
Roll weight 20 lbs (9.1 kg)
Rolls per pallet 35
57