Instructions / Assembly

ManualsBrandsGCP Applied Technologies ManualsDoor & Window Flashing12 in. x 75 ft. Vycor Pro Fully-Adhered Butyl Flashing

SECTION 076526

Self-adhering sheet flashing

Vycor

Pro Flashing

PART 1 — GENERAL

1.00 RELATED DOCUMENTS

A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1

Specification Sections, apply to this Section.

1.01 SUMMARY

A. Section provides for a flexible butyl adhesive based self sealing flashing tape

1.02 REFERENCES

A. American Society for Testing and Materials

1. ASTM E96 – Test Methods for Water Vapor Transmission of Materials

2. ASTM D570 – Test Method for Water Absorption of Plastics

3. ASTM E2112 – Standard Practice for Installation of Exterior Windows, Doors, and Skylights

4. ASTM D1970 – Standard Specifications for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as

Steep Roofing Underlayment for Ice Dam Protection

5. D412 – Test Methods for Vulcanized Rubber & Thermoplastic Rubbers and Thermoplastic Elastomers – Tension

6. ASTM D3652 – Standard Test Method for Thickness of Pressure Sensitive Tapes

1.03 SUBMITTALS

A. Product Data and Shop Drawings: Submit for each product; Spec-Data®/Data Sheets, details and

installation procedures.

B. Test Reports: Indicating compliance with the performance requirements of this section.

C. Samples of flashing.

1.05 DELIVERY, STORAGE, AND HANDLING

A. Comply with manufacturer’s recommendations for storage and handling of each product.

1.06 WARRANTY

A. Standard Product Warranty:

1. Submit manufacturer’s warranty that flashing and accessories are free of defects at time of delivery, and are

manufactured to meet manufacturer’s published physical properties and material specifications.

2. Warranty Period: Five years from date of completion of the flashing installation.

3. Installer to warrant that flashing and accessories have been installed in accordance with manufacturer’s

recommendations.

PART 2 — PRODUCTS

2.01 MATERIALS

A. Flashing Description: 0.3 mm of a cream colored non-asphaltic, butyl-modified, adhesive integrally bonded to 0.1 mm of

engineered polypropylene film to provide a min. 0.4 mm (14 mil) thick membrane. Membrane shall be interleaved with

silicone-coated release paper until installed.

B. Performance Requirements:

1. Meets or exceeds the requirements set forth in AAMA 711-13 voluntary specification for self adhered flashing

Level 3 requirement for elevated temperature exposure.

2. Meets or exceeds the requirements set forth in ASTM E2112 for Flashing Exterior Windows and Doors

3. Water Penetration around Nails: ASTM D1970 Section 7.9, modified per section 5.2.1 of AAMA 711 voluntary

specification – Pass 1.2 in head of water

4. Tensile Strength: ASTM D412, Die C Modified – Min. 985 kPa (143 psi)

5. Thickness: ASTM 3652 – Min 14 mils

6. Color: Visual inspection – White film with green printing,

Summary of content (3 pages)

PAGE 1
SECTION 076526 Self-adhering sheet flashing ® Vycor Pro Flashing PART 1 — GENERAL 1.00 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section. 1.01 SUMMARY A. Section provides for a flexible butyl adhesive based self sealing flashing tape 1.02 REFERENCES A. American Society for Testing and Materials 1. ASTM E96 – Test Methods for Water Vapor Transmission of Materials 2.
PAGE 2
C. Product: Vycor® Pro Flashing manufactured by GCP Applied Technologies, Inc. D. Flashing Accessories: 1. Primer: a. Description: Water-based primer which imparts an aggressive, high tack finish on the treated substrate. (1.) Flash Point: No flash to boiling point (2.) Solvent Type: Water (3.) VOC Content: Not to exceed 10 g/L (4.) Application Temperature: -4ºC (25ºF) and above (5.) Freezing point (as packaged): -7ºC (21ºF) b. Product: Perm-A-Barrier WB Primer manufactured by GCP Applied Technologies, Inc.
PAGE 3
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us.