User's Manual
20
Install Steps
♦ Mark the drill holes by holding the foot of the wall
bracket at the desired mounting location and marking the
hole positions.
♦ Useadrillwitha6mmdrillbittodrilltherequiredholes
and insert the plugs and insert the wall plugs flush with
the wall.
♦ Screw the wall bracket to the wall using the supplied
screws .
♦ Mount the camera on the tripod screw and screw the
camera a little way on (about three turns).
♦ Turn the camera in the desired direction and lock it with
the lock nut .
♦ To move the camera into its final position, undo the two
pivot bolts a little, position the camera and fix the position
by tightening the two pivot bolts .