User's Manual

Grizzly Ears 46
Bluetooth True Wireless Stereo Earbuds
User Manual
Bluetooth Version：
Bluetooth Profiles Supported：
Audio Decoding Protocol：
Transmission Power：
Operation Range：
Frequency Range：
Battery of Headset：
Charging Voltage of Headset：
Charging Time of Headset：
Battery of Base：
Charging Voltage of Base：
Charging Time of Base：
Charging Headset Times from
Charging Base ：
Charging Base Supply Power
for Headset Music Play Time：
Music Playing Time：
Talk Time：
Standby Time：
Dimensions of Charging
Base(mm)：
Dimensions of Headset(mm) ：
Weight(one headset) ：
：
Total Weight
V5.0
HSP, HFP, A2DP, AVRCP
SBC, AAC
Class 2
Up to 10 meters
2.4GHz-2.48GHz
45mAH Li-polymer Battery
5V
About 1.5 hour
460mAH Li-polymer Battery
5V
About 2 hours
2-3times
More than 6 hours
Up to 3.5 hours
Up to 3.5 hours
Up to 85 hours
L80×W33×H31
L27×W22.8×H26
About 4.6g
About 41g
Status No. Status Headset Performance
1
2
3
5
4
Pairing
Charging
Power ON
Power Off
Pink indicator light flash once
Delete connection
between 2 earbuds
Bluetooth headset should be used with the compatible devices
which support Bluetooth wireless technology. This allows you to
make two calls and enjoy the music streaming at any time freely.
Please read this user manual carefully before using the headset,
and also read your device’s user manual regarding the Bluetooth
function, and pay attention to those important safety and
maintenance information.
Please keep the headset away from children.
Specifications
Structure Sketch
*The time mentioned above may vary due to user's operation mode and
device settings.
The indicator light of headset(R) flashes
red and blue alternately.
Blue indicator light flashes 3 times
Red indicator light flashes 3 times.
Red indicator light on, light off when
charging completed.
5
1
2
3
4
7
6
1）MFB(multifunction button)
2）Indicator light(MIC)
3）Speaker
4）The charging contact point
5）ON/OFF button
6）Charging base indicator
7）Micro USB charging port
Set Up
Press MFB for 2 seconds to turn on
Turn on pairing function on your
device, connect to “Grizzly Ears 46”
Pick up the two earphones
from the charging base to
turn on
Wait until to see red & blue LED flashing, it is under pairing mode
or:
Bluetooth
ON
Connect
Grizzly Ears 46
2s
Single Tap
Double Tap
Press and Hold
Pause: Tap R
Play: Tap either L or R while pause
Pick up call: Tap L or R
End call: Tap L or R
Rejecting call: Hold L or R
Two-calling handling is not supported on
all devices
1. Press and hold the R to end the
current call and answer the second call
2. Tap L or R to hold the current call
and answer the second call
3. After picked up the second call, tap
L or R to switch between calls
4. Hold and press L or R to end
either call
Second
Charging - Red LED on
Finish charging - LED off
Charging
1. Put the earphone (L)(R) into the correct position close the
charging case.
2. Use the USB charging cable for charging.
Note: Please charge the base with earphones inside before using.
Multi-function Buttons
Note: The Grizzly Ears 46 come with one “master” - “R”
earphone, one “slave” - L earphone. When you turn on the
earphones after they connected, “master” flash red and blue
alternately, “slave” flash blue.
Master
Slave
Note: Please don’t pick “Grizzly Ears 46-L”. Restart or reset
the earphones if you cannot find “Grizzly Ears 46”
Amplify:
Note: 1. Quick double taps to activated Amplify Shot
Compression.
2. When you double tap to switch from Audio to Amplify it takes 4-6
seconds to activate Amplify Shot Compression.
3. Hearing protection activate after gun shoot.
4. Shot compression doesn’t work in audio music mode must be in
amplify mode for shot compression.
Start or end: Double tap L or R
L R
FCC ID: 2AR8IGRIZZLYEARS46