Architect and Engineering Manual
20
REMOTE THERMOSTATS
RAK180W1
ENERGY MANAGEMENT OCCUPANCY-SENSING
WIRED/WIRELESS THERMOSTAT
• 2-wire power connection available
(all other signals wireless)
• Thermostat (shown) & control card (mounts on top
of unit) included
• Control card works off 24 Volt AC signal from unit
• Works with single-stage cooling and single-stage or
two-stage heating systems with proper setup.
Default is two-stage heating and B-type heat pump
• Extra 24V output may be programmed to control
other room systems such as lighting, vents, etc.
RAK149F2
HEAT PUMP DIGITAL
TWO-FAN-SPEED THERMOSTAT
• Two fan speeds
• 24V AC digital remote wall thermostat
• Requires 6-wire (resistance heat) or 7-wire
(heat pump) hookup
• Works with single-stage cooling and single-stage
or two-stage heating systems
RAK149P2
HEAT PUMP DIGITAL PROGRAMMABLE
REMOTE THERMOSTAT
• 24V AC digital remote wall thermostat
• Programmable for 7-day or 5+2-day programs
• Requires 5-wire (resistance heat) or 6-wire
(heat pump) hookup
• Works with single-stage cooling and
single-stage or two-stage heating systems
All Zoneline® Vertical units are compatible with GE Appliances’
wall-mounted remote thermostats.
Specifications subject to change without notice.