Installation Guide

28
2
REI N STALL FREEZER D OOR.
A. Using a Torx T-20 screwdriver, remove the
bolts securing the door stop on the bottom
right of the door.
B. Using a Trox T-20 screwdriver, remove the
plastic force closure on the bottom right of
the door.
C. Flip the plastic force closure and mount it to
the bottom left of the door.
D. Install the door stop to the bottom left of the
door.
E. Lower the freezer door and make sure t o
insert the hinge pin in the bottom hole of the
door.
F. Straighten the door and line it up with the
center hinge bracket. Using a 1/4” Allen
wrench, turn the hinge pin until it extends
through the hinge bracket and into the door.
3
REI N STALL FRESH FOOD DOOR.
A. Using a Torx T-20 screwdriver, remove the
bolts securing the door stop on the bottom
right of the door.
B. Tr a n sf er t h e pl ast i c t h i m bl e t o t h e op p osi t e
hole. Install the door stop with the plastic
thimble on the opposite side.
C. Using a Trox T-20 screwdriver, remove the
plastic force closure on the bottom right of
the door.
D. Flip the plastic force closure and mount it to
the bottom left of the door.
E. Install the door stop to the bottom left of the
door.
F. Lower the fresh food door and make sure t o
insert the hinge pin in the bottom hole of the
door.
G. Remove the hinge base from the hinge. Flip
the hinge over and remount to hinge base.
Installation Instructions
REVERSI NG THE DOOR (Cont .)
28
For ce closur e
Door stop
Left Bott om
of Door
Ri g h t Bo t t o m
of Door
Hinge base
Hinge
For ce closur e
Pl a st i c Th im b l e
Door stop