Quick Specs

ManualsBrandsGE Appliances ManualsDishwashersGE Spacemaker® Under-the-Sink Dishwasher

Specification Created 11/01

Listed by

Underwriters

Laboratories

GE Appliances

GSM2100GWW/CC—GE Spacemaker

Under-the-Sink Dishwasher

Plumbing/Electrical Rough-In Dimensions (in inches)

2" From

cabinet

2" From

floor

19" From

wall

Cable 24"

from wall

White (neutral)

Black (line)

Ground

Plumbing and

wiring must enter

within this area

from either side,

rear or bottom

FRONT VIEW

Hot

Cold

Note: Undersink dishwashers can be installed only under sinks and not

under other appliances.

Plumbing—Hot Water Only: Use 3/8" O.D. copper tubing or 1/2" O.D.

plastic tubing minimum inlet line. Water valve has 3/8" internal threads.

Hand cut-off valve is recommended.

Electrical: Fuse circuit with 15 amp or 20 amp standard fuse or circuit

breaker. Total amp load is 8.6. Dishwasher operates on 120V, 60HZ power,

Two-wire cable (14 Ga. Min.) with ground must be installed.

Specifications: Inlet water temperature recommended—minimum 120°F

at dishwasher. Inlet water pressure required—15 to 120 lbs./sq. inch.

Note: All rough-in, both plumbing and electrical, must be completed before

the dishwasher is installed. All plumbing and electrical work must be in

accordance with local codes.

For answers to your Monogram,

GE Profile

™

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center

service, 800.626.2000.

As an ENERGY STAR

Partner,

GE has determined that this product

meets the ENERGY STAR

guidelines for energy efficiency.

Summary of content (4 pages)

PAGE 1
GE Appliances GSM2100GWW/CC—GE Spacemaker® Under-the-Sink Dishwasher Plumbing/Electrical Rough-In Dimensions (in inches) Note: Undersink dishwashers can be installed only under sinks and not under other appliances. FRONT VIEW Plumbing and wiring must enter within this area from either side, 4 rear or bottom Plumbing—Hot Water Only: Use 3/8" O.D. copper tubing or 1/2" O.D. plastic tubing minimum inlet line. Water valve has 3/8" internal threads. Hand cut-off valve is recommended.
PAGE 2
GE Appliances GSM2100GWW/CC—GE Spacemaker® Under-the-Sink Dishwasher Rough-In for Installation with Disposer Dimensions (in inches) Rear View Plumbing Arrangement Dimensions (in inches) Waste air gap To air gap Directional flow tee FRONT VIEW Drain connection 4 1-1/2" MAX. dia.
PAGE 3
GE Appliances GSM2100GWW/CC—GE Spacemaker® Under-the-Sink Dishwasher Wall Cabinet Rough-In Dimensions (in inches) 20-1/2" MAX. Sink bowl 3/4" MIN. Countertop 1-1/2" MIN. thick 1" MAX. to sink flange 11" MIN Drain CL 6" MAX. A 10-1/4" MAX. 1-1/4" MIN. I.R. 7-1/2 34-1/4 ± 1/4 FRONT VIEW Cabinet Rough-In Note: Either single- or double-bowl sink may be used, centered or offset, as shown in the front view illustration. 10-1/4" MAX.
PAGE 4
GE Appliances GSM2100GWW/CC—GE Spacemaker® Under-the-Sink Dishwasher Features and Benefits • Energy Star® Qualified • Two Wash Levels • Five Cycle Selections: Pots & Pans, Normal Wash, Short Wash (Dial), Plate Warmer (Dial) and Rinse Only (Dial) • 12 Options including Heated Dry and HotStart™ • Spacemaker Upper Rack • Deluxe Lower Rack • Deluxe Silverware Basket • Turn-to-Start Controls • Rinse Aid Dispenser • PermaTuf™ Tub and Door Liner • QuietPower™ Motor • Model GSM2100GWW - White on white • Model GSM2