Quick Specs

Specification Created 11/01
R
Listed by
Underwriters
Laboratories
GE Appliances
GSM2100GWW/CC—GE Spacemaker
®
Under-the-Sink Dishwasher
Cabinet Cut-Out for Sink Dimensions (in inches)
Cabinet Rough-In Dimensions (in inches)
;;
;;
12
3-1/4
12-1/2
5
5
Sink
installation
cutout
8" x 20" Adjacent
cabinet rear cutout
Cabinet side
adjacent to D/W
FRONT VIEW
Cabinet cutouts for offset single and double
bowl sinks. Dishwasher not provided with
complete enclosure. Enclosures for sides,
top, bottom and back must be provided by
installer at time of installation.
11-3/4
C
B
Access insert
Detail D
Panel Thickness
Door insert
Front
of
Panel
A
1-1/2
1/2
When using GPF325
1/4" custom dishwasher
door and access panel kit.
When using GPF375
3/4" custom dishwasher
door and access panel kit.
1/4
3/4
Cabinet Rough-In Note: Either single- or double-bowl sink may
be used, centered or offset, as shown in the front view illustration.
The 20-1/2" maximum dimension from wall to front of sink bowl
must be accurate if dishwasher is to fit properly under sink. Water
lines to sink faucet and drain from sink can be run through area “A.”
HOT WATER line to dishwasher is installed in area “B.”
Garbage disposer, water lines to faucet, trap, waste air gap and
water cutoff valve are installed in 12" wide cabinet shown in area
“C.” Sink opening for garbage disposer must be dimensioned as
shown in front view, area “C” (7-1/2"). This will provide clearance
for the disposer and plumbing in cabinet “C” when using double
bowl sink.
If the sink bowl is more than 20-1/2" maximum specified distance
form the wall, or if the base cabinet is less than the 24" minimum
depth from the wall, a gap between the tub front flange and the
front of the base cabinet may result.
Undersink Dishwasher
Wood Insert Dimensions (in inches)
Countertop 1-1/2" MIN. thick
FRONT VIEW
7-1/2
6" MAX.
24 12"
MIN.
Floor
Toe
kick
area
Front of cabinet
Flange
4" MAX.
11-3/4"
MAX. Plumbing
1-1/4"
MIN. I.R.
34-1/4
± 1/4
3/4" MIN.
Wall
Floor
6" MAX.
C
L
11" MIN
Drain
20-1/2" MAX.
Sink bowl
1" MAX. to
sink flange
10-1/4" MAX.
Plumbing depth
SIDE VIEW
Dishwasher
10-1/4" MAX.
A
24"
min. cabinet
For answers to your Monogram,
®
GE Profile
™
or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
As an ENERGY STAR
®
Partner,
GE has determined that this product
meets the ENERGY STAR
®
guidelines for energy efficiency.