Quick Specs
JTS3000DN/EN/SN
GE
®
30" Smart Built-In Self-Clean Single Wall Oven
with Never Scrub Racks
For answers to your GE Profile
™
or GE Appliances product
questions, visit our website at geappliances.com or call
GE Answer Center
®
Service, 800.626.2000.
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Listed by
Underwriters
Laboratories
ADA
COMPLIANT
Specification Revised 12/20
NOTE: Single wall ovens are NOT approved for
stacking above or below another single wall oven.
NOTE: Wall coverings, countertops and cabinets
surrounding the wall oven must be able to withstand a
temperature of up to 200°F (94°C).
NOTE: If the cabinet in which the wall oven is installed
does not have a solid bottom, two braces or runners
must be installed to support the weight of the oven. The
runners and braces must support up to 220 lbs (99 kg).
NOTE: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90° walls
should be placed to avoid interference with the handle.
ATTENTION INSTALLER: Electric wall ovens
are NOT approved for installation with a plug and
receptacle. They must be hard wired into an approved
junction box.
IMPORTANT: Before installing, consult installation
instructions packed with product for current
dimensional data.
KW R ATING
240V 4.2
208V 3.2
BREAKER SIZE
240V 20 Amps
208V 20 Amps
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
22" to
bottom of
junction box
Junction box
location
9-1/2" MAX.
D
23" min. door opening
allowance for drop-down doors,
and 30" min. allowance for
side-swing doors.
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
22" to
bottom of
junction box
Junction box
location
9-1/2" MAX.
D
23" min. door opening
allowance for drop-down doors,
and 30" min. allowance for
side-swing doors.
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
22" to
bottom of
junction box
Junction box
location
9-1/2" MAX.
D
23" min. door opening
allowance for drop-down doors,
and 30" min. allowance for
side-swing doors.
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
22" to
bottom of
junction box
Junction box
location
9-1/2" MAX.
D
23" min. door opening
allowance for drop-down doors,
and 30" min. allowance for
side-swing doors.
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
JTS3000
Dimension and installation information are shown in inches.