Quick Specs

ZDP486NDPSS (NATURAL GAS) ZDP486NDPSS (NATURAL GAS)
ZDP486LDPSS (LIQUID PROPANE
MONOGRAM 48" DUAL-FUEL PROFESSIONAL
RANGE WITH 6 BURNERS AND GRIDDLE
DIMENSIONS AND INSTALLATION INFORMATION
(IN INCHES)
Product Specification Revised 8/19
ELECTRICAL REQUIREMENTS
Ranges must be supplied with 208/240V, 60Hz, and
connected to an individual, properly grounded branch
circuit protected by a circuit breaker or time-delay fuse.
Install a 50-amp circuit for 48" ranges. The receptacle
must be a NEMA 14-50R device to accept the four-prong
plug on the range.
OPTIONAL BACKSPLASH ACCESSORIES
The range requires a 12" minimum clearance to a vertical
combustible surface at the rear. A backsplash is required
for installations with less than 12" clearance. The following
backsplash accessory is available, or a custom, non-
combustible backsplash can be used
ORDER ONE WITH A 48"-WIDE RANGE BACKSPLASH
UXADJB48PSS– 30"-36" adjustable-height
backsplash with warming shelf
SIDE VIEW WITH A BACKSPLASH
Locate gas and electric as shown
GAS SUPPLY
• The natural gas models are designed to operate at
5" water column pressure. For proper operation, the
pressure of the natural gas supplied to the regulator
must be between 7" and 13" water column.
• The LP models are designed to operate at 10" water
column pressure. For proper operation, the pressure
of the LP gas supplied to the regulator must be
between 11" and 13" water column.
UTILITY LOCATIONS