Installation Guide

11
About Hot Water. GEAppliances.com
To Use Hot Water Dispenser
• Press HOT WATER button.
• Select desired water temperature on the LCD screen (90, 150,
170, 185, or Custom).
• When hot water is ready (indicated on the screen and by a
beeping sound) hold container with left hand centered in the
recess under the spout.
• To dispense water, rotate the hot water knob counterclockwise
and then push it in. The knob must be held in during dispense.
Important Facts about HOT WATER
•
WARNING
Scalding Hazard.
The water coming from the dispenser is very hot and can cause
scalds or burns. Read all warnings prior to use. (See page 4.)
• Always use a container that is suitable for hot liquids (ceramic,
styrofoam, etc.)
• The maximum single hot water dispense amount is 10 oz.
Additional hot water can be dispensed by restarting the hot
water feature through the LCD screen.
• HOT WATER works best with household water pressure of 40 to
100 psi.
• HOT WATER will time out if unused and may require a short
reheat time.
Temperature Express Modes Settings
Water
Lock
Controls
Precise
Fill
Hot
Water
Light
Water Crushed Cubed