Owners manual

46
49-80706
Questions?
Use this
problem
solver
Upper Oven
Problem Possible Causes What To Do/Explanation
DISPLAY
The display is blank Power saver mode • Check the SETTINGS menu for clock
may be activated. display settings. Turn the display on.
“Control is LOCKED” The control has • Press and hold CLEAR/OFF for
appears in display been locked. 3 seconds to unlock the control.
Control display is Clock is not set. • Set the clock.
lit yet oven
Door not securely closed. • Open the door and close securely.
will not start
START/PAUSE pad or dial • Press START/PAUSE or dial.
not pressed after entering
cooking selection.
Another selection already • Press CLEAR/OFF.
entered in oven and
CLEAR/OFF pad not
pressed to cancel it.
 6L]HTXDQWLW\RUFRRNLQJ 0DNHVXUH\RXKDYHHQWHUHGFRRNLQJ
time not entered after time after selecting.
final selection.
CLEAR/OFF was pressed • Reset cooking program and press
accidentally. START/PAUSE.
OTHER PROBLEMS
The door and inside The heat lamps • This is normal.
of the oven feels hot produce intense heat • Use oven mitts to remove food when
in a small space. when ready.
Oven will not start A fuse in your home • Replace fuse or reset circuit breaker.
may be blown or the
circuit breaker tripped.
Troubleshooting
Problem Possible Cause What To Do
Cannot edit cooking
features
Some pre-programmed cooking features
may not be able to be edited to prevent
degradation of cooking performance.
This is normal.
Problem Possible Cause What To Do
Display goes blank A fuse in your home may be blown or the
circuit breaker tripped.
Replace the fuse or reset the circuit breaker.
Power outage or surge Reset the clock. If the oven was in use, you must reset
it by pressing the Clear/Off pad, setting the clock and
resetting any cooking function.