Specification

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
CT9550EK
GE Cafe
™
Series 30 in. Built-In Double Convection Wall Oven
Specification Created 6/16
NOTE: Cabinets installed adjacent to wall
ovens must have an adhesion spec of at least a
194°F temperature rating.
Door handle protrudes 2-1/2" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance with
installation instructions.
INSTALL ATION INFORMATION: Before
installing, consult installation instructions
packed with product for current dimensional
data.
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F – Overall width 29-3/4"
CT9550
22" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
9-1/2"
MAX.
47" to
bottom of
junction box
D
F
E
Conduit
48-1/2"
Junction box
location
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and ush
with sides of cutout
or solid bottom oor
Suitable
bracing
to support
runners
(must support 375 lbs.)
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Minimum
cutout location
12" (30.48 cm)
from the oor
Cutout height
51-13/16" MIN.
51-15/16" MAX.
21"
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F – Overall width 29-3/4"
CT9550
22" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
9-1/2"
MAX.
47" to
bottom of
junction box
D
F
E
Conduit
48-1/2"
Junction box
location
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and ush
with sides of cutout
or solid bottom oor
Suitable
bracing
to support
runners
(must support 375 lbs.)
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Minimum
cutout location
12" (30.48 cm)
from the oor
Cutout height
51-13/16" MIN.
51-15/16" MAX.
21"
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F – Overall width 29-3/4"
CT9550
22" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
9-1/2"
MAX.
47" to
bottom of
junction box
D
F
E
Conduit
48-1/2"
Junction box
location
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and ush
with sides of cutout
or solid bottom oor
Suitable
bracing
to support
runners
(must support 375 lbs.)
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Minimum
cutout location
12" (30.48 cm)
from the oor
Cutout height
51-13/16" MIN.
51-15/16" MAX.
21"
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F – Overall width 29-3/4"
CT9550
22" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
9-1/2"
MAX.
47" to
bottom of
junction box
D
F
E
Conduit
48-1/2"
Junction box
location
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and ush
with sides of cutout
or solid bottom oor
Suitable
bracing
to support
runners
(must support 375 lbs.)
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Minimum
cutout location
12" (30.48 cm)
from the oor
Cutout height
51-13/16" MIN.
51-15/16" MAX.
21"
KW RATING
240V 9.0
208V 6.8
BREAKER SIZE
240V 40 Amps
208V 40 Amps
CT9550
Listed by
Underwriters
Laboratories