User's Manual

Vscan Air Configuration (for iOS and Android)
4-16
Vscan Air
–
User Manual
Direction GP092020-1EN
Rev 08
Configure Dicom Image Server (continued)
4. Press “Verify Server” to verify communication with the
DICOM Image Server.
“Verify server succeed” pop-up message displays if the
communication with the Server is ok.
Press OK and then Press “Add” to add the DICOM Image
Server.
If communication fails, check the server settings and make
necessary corrections.
Figure 4-21. DICOM Image Server
NOTE: Make sure that the display device hosting Vscan Air app
and the PC in which server is configured are connected to
same network.