User's Manual

Safety
2-6 Vscan Air – User Manual
Direction GP092020-1EN
Rev 08
Diagnostic information (continued)
The user should be aware of the product specifications and of
the device accuracy and stability limitations. These limitations
must be considered before making any decision based on
quantitative values. If in doubt, the nearest GEHC ultrasound
service office should be consulted.
Equipment malfunction or incorrect settings can result in
measurement errors or failure to detect details in the image. The
user must become thoroughly familiar with the operation of the
Vscan Air in order to optimize its performance and to recognize
possible malfunctions.
Personnel and equipment safety
Explosion hazard
Never operate the equipment in the presence of flammable or
explosive liquids, vapors or gases. Malfunction in the Vscan Air
CL probe or in the Personal mobile device, can electrically ignite
these substances. Operators should be aware of the following
points to prevent such explosion hazards.
• If flammable substances are detected in the environment,
do not plug in or turn on the device.
• If flammable substances are detected after the device has
been turned on, do not attempt to turn off the Vscan Air CL,
or to unplug it.
• If flammable substances are detected, evacuate and
ventilate the area before turning off Vscan Air CL.
CAUTION
Avoid reflections from windows/lamps/direct sunlight on the
display. Avoid analyzing data from small viewing angles.
DANGER
The hazards listed below can seriously affect the safety of
personnel and equipment during a diagnostic ultrasound
examination.