User's Manual

Vscan Extend Settings
4-6 Vscan Extend – User Manual
5721203-100
Rev. 13
Configure Worklist Server (continued)
NOTE: By default, DICOM is listed while configuring the Worklist
Server.
Figure 4-6. DICOM listed
2. Enter any unique name for Calling AE Title (e.g. Nixon
Building Schedule).
3. Press Add to add the Worklist Server.
4. Press Verify to verify communication with the Worklist
Server.
“Verify OK” pop-up displays if the communication with the
Worklist Server is ok.
If communication fails:
• check the server settings and make necessary
corrections.
• Vscan Extend and the DICOM image server are not
connected to the same network. Check network settings
for all components.
NOTE: If verify fails, a user rejection message (for example)
displays.
Figure 4-7. Verify failed message examples