User's Manual

Using Vscan Extend
5-68 Vscan Extend – User Manual
5721203-100
Rev. 13
Creating a new protocol (continued)
3. Enter a name for the protocol.
NOTE: This step is mandatory. If you do not enter a name, an error
message displays indicating to add protocol name, while
trying to save the protocol or moving to the next step.
4. Enter a description about the protocol.
NOTE: Entering the description is optional.
NOTE: The maximum length for a protocol name and description is
50 characters.
Adding a step
1. Press ADD STEP on the Create new steps screen.
Figure 5-74. Add Step
2. Enter a step name.