User's Manual

Using Vscan Extend
5-70 Vscan Extend – User Manual
5721203-100
Rev. 13
Adding reference images from a PC to Vscan Extend
1. The reference images to be added to a protocol step should
be uploaded to a pre-defined folder on the Vscan Extend
device from a PC.
NOTE: The recommended format for reference images is .mp4 and
.jpeg. If you upload any other formats than .mp4 and .jpeg,
the system displays an error message.
2. Connect the device to a PC via the USB cable.
A pop-up message “Allow system to connect to PC.Further
interaction with device is blocked” displays. Press Allow to
connect.
3. Create a folder named “Protocol” on the device in the
following path.
Computer\Pixel V2+\Phone storage\Protocol
4. Create another folder named “Images” inside the “Protocol”
folder.
5. Copy the reference images from the PC to “Images” folder.
NOTE: The recommended format for reference images is .mp4 and
.jpeg. If you upload any other formats than .mp4 and .jpeg,
the system displays an error message. The recommended
resolution of the reference images is 240 x 320. If you try to
upload an image with a different resolution, the system
scales the size to maintain the aspect ratio of the original
image.
6. Disconnect the device from the PC.