User's Manual

Using Vscan Extend apps
Vscan Extend – User Manual 5-73
5721203-100 Rev. 13
Saving the protocol
1. After you have finished adding all steps for the protocol,
press Save Protocol to complete creating the protocol.
Figure 5-78. Save Protocol
2. Press Menu -> Start a protocol to view the user created
protocols under My Protocols.
Refer to the ‘Creating a new protocol’ on page 5-67 to create
additional protocols.
The protocols can be edited before or after saving. Refer the
‘Edit an existing user created protocol’ on page 5-74 to edit
protocols.