User's Manual

Using Vscan Extend
5-104 Vscan Extend – User Manual
5721203-100
Rev. 13
Using Scan Coach FATE app (continued)
8. Enter the storage PIN when you store the image for the first
time.
NOTE: A device PIN has to be created for security purposes to
access or store images/ videos. This PIN is created prior to
the first use or after the system has been reset. Once the
PIN is set, the user is prompted for the PIN when:
• Images/videos are stored in the spooler
• User wishes to store an image/video
• The session duration time has expired
NOTE: You can store multiple images for a particular scan plane, if
needed. All the images are annotated with the step name.
9. Swipe right to left to navigate to the next step.
10. Complete the acquisition procedure described above.
Follow the same procedure for the remaining steps in the
protocol.
NOTE: You can swipe right to left to go to the next step, without
storing an image, if you wish. In such a case, the step does
not get registered as complete. You will see a red icon next
to the image in the Session Completed screen.
11. After you complete acquisition for all the steps, a message
displays - Moving to session summary.
Press OK.