User's Manual

Vscan Extend Maintenance
6-6 Vscan Extend – User Manual
5721203-100
Rev. 13
Cleaning instructions
Cleaning the probe
1. Remove the gel by wiping the probe lens with a soft cloth.
2. Wipe the probe and cable with a soft cloth moistened with a
warm soap and water solution (<80
0
F/27
0
C).
3. Wipe the probe and cable with a soft cloth moistened with
clean water (<80
0
F/27
0
C) until all soap is removed.
4. Wipe dry with a soft towel.
Cleaning the USB door
1. Open the USB door.
2. Wipe the inside of the door with a soft cloth moistened with a
mild, general purpose, non-abrasive soap and water
solution.
3. Wipe dry with a soft cloth.
Figure 6-1. Open the USB door
Method of cleaning: Manual
CAUTION
Avoid any liquid making contact with the internal device
components, including the micro USB connector and battery
terminal contacts, which are not designed for making contact
with liquids.
CAUTION
DO NOT use brush, abrasives, sharp tools or any other
methods that may damage the inside or surface of the device.
DO NOT scratch or press any part of the Vscan Extend with a
sharp object, such as pencils or pens, as this may result in
damage to Vscan Extend.