User guide

GEL100340
3.1.2 Editing schematics
Put a part of a schematic Cu$
into the clipboard
CTRL+X
Copy a part of a
COPY
CTRL+C
schematic into the
cliDboard
Insert from clipboard Easte CTRL+V
Delete the selected part Qelete DEL
of a schematic
Select the whole Select All CTRL+A
schematic
Remove the whole Remove All
contents of the
schematic
Edit the list of logical ~ogicals..
variables
Edit the list of variables Xariabies..
Comments
The parts of a schematic which were put 5.7.3
into the clipboard by Cut or Copy are
inserted into the current schematic
The selected part of the schematic is 57.5
deleted.
The total contents of the schematic is
selected.
5.7.1
The total contents of the schematic is
deleted.
5.7.5
A dialog window is opened for editing 6.3
(inserting, deleting, changing) the logical
variables of the project.
A dialog window is opened for editing 6.2
(inserting, deleting, changing) the
variables of the oroiect.
3.1.3 Changing the view of the schematics
To View Shortcut Comments See paragraph
Zoom into schematic ZoomJn 1 CT++ IIncreases the zoom factor. 5.6
Zoom out of schematic Zoom Qut ALT+- 1 Decreases the zoom factor. 5.6
Zoom original size Zoom 1:l ALT+l Sets the zoom factor to a value of 1. 5.6.2
Show whole schematic mole ALT+2 Changes the zoom factor to a value that 5.6
the entire contents of the schematic fits
into the window.
Showing/hiding the Block Toolbar If this menu item is checked the toolbar 4.4.2
block toilbar
Showing/hiding the
execution order
execution
Order
for selecting blocks is visible.
If this menu item is checked the 8.2
execution order is displayed within the
schematics.
Showing/hiding the info Quick Info If this menu item is checked the names of 5.6.3
the blocks and ports are displayed when
the cursor moves on them.
ofblockandpc&names 1 )
Showing/hiding the Quick Xalue
value of signals
If this menu item is checked the actual 9.5.1
value of a signal is displayed during
simulation if the cursor moves on it.
wow3
6