User guide

WintDrive
Input ports
Pos AccT float
PosDecT float
NegAccT
float
NegDecT float
Reset
Preset
int
int
Output ports
executed
description
always
Set point to be followed [x]
.f actual ramp time SetPoint used as reference to determine each ramp
!=O
time [xl. It must be positive. If not it is assumed as
positive
if previous Positive acceleration time [set] for RampOut to go
output>=0 and from 0 to RefSetPoint when RampOut is greater
SetPoinb=O than 0. It must be positive. If not it is assumed as
positive
if previous Positive deceleration lime [set] for RampOut to go
output>=0 and from RefSetPoint to 0 when RampOut is greater
SetPoint<
than 0. It must be positive. If not it is assumed as
positive
if previous Negative acceleration time [set] for RampOut to
output<0 and go from 0 to -RefSetPoint when RampOut is less
SetPointcO than 0. It must be positive. If not it is assumed as
positive
if previous
Negative deceleration time [set] for RampOut to
output>=0 and
go from -RefSetPoint to 0 when RampOut is less
SetPoint>=O
than 0. It must be positive. If not it is assumed as
positive
always If Reset!=O, RampOut is set to 0
if Reset==0 If Preset!=O, RampOut is set to SetPoint
WO228
name type description
RampOut
float Ramp output [xl
NegRamp int
Set to 1 if decreasing ramp is used, otherwise it is
set to 0
PosRamp int Set to 1 if increasing ramp is used, otherwise it is
set to 0
175