User guide

ManualsBrandsGE Industrial Solutions ManualsEquipment6KCV300WPD

WintDrive

5.3 Placing Text and labels

In order to have comments on a schematic for explanation texts and labels can be placed. Both have no

function for the code generation and are provided only for readability. Texts and labels are nearly identical;

the only difference is that labels are linked to blocks while texts are not.

53.1

Placing a Text

For placing a text perform the following actions:

select the menu item

Text

from the

Insert

menu. The cursor changes to four arrows pointing to the

middle.

move the mouse to the point within the schematic the text should be placed

click the left mouse button at this point. Now a text “Comment on scheme“ is inserted

to change the

initial

string of the text you have to modify it as decribed below.

To cancel this action, press the ESC key.

53.2 Placing a label

To insert a label the following actions have to be performed:

select the menu item

Label

from

the Insert

menu. The cursor changes.

move the mouse over the block the label should be linked to.

click the left mouse over this block. Now a label with the text “Comment on Block [blockname]“ is

inserted below this block.

to change the initial string you have to modify it.

To cancel this action press the

ESC

key.

5.3.3 Modif’jGng

the Text

To change a text or label, the appropriate item has to be selected by clicking the left mouse button on it. The

color of the selected item changes to red. By double-clicking or by pressing the right mouse button, a dialog is

opened for entering the new string.

Figure 5.3.3.1: Change Text Dialog

Enter the new text in the

text

field. Closing the dialog by the

button will change its value, while pressing

Cancel

leaves it unchanged.

A text can consist of several lines. The font cannot be changed.

5.3.4 Moving Texts or Labels

To move a text or label to a new position, first it has to be selected by clicking the left mouse button. Then by

holding down the left mouse button while moving the mouse it can be moved to a new position. The move-

ment is finished by releasing the left mouse button.