User guide

GEI-100340

Figure 9.1.2.1: Set Debug Window Dialog

Using radio buttons it can be selected if the probe shall be displayed in a monitor or trace window. The two

lists at the bottom of the dialog are used to select the windows in which the probe will be displayed. Select the

appropriate windows from the right list and move them by the left arrow button to the left list. A probe can be

displayed in several windows.

ends the probe setting while

Cancel

leaves everything unchanged.

9.2 Removing Probes

Removing probes can be done either using the

Remove Probe

item of the

Edit

menu or using the context

sensitive menu while the mouse pointer is on a probe. The actions to be performed are similar to the ones for

setting a probe.

If all probes shah be removed select the

Remove All Probes

item from the

Edit

menu.

9.3 Configuration of

the

Monitor Window

The configuration of a monitor window is done by a context sensitive menu that is opened by the right mouse

button while the monitor window has the focus. The following items are available:

Turn Off Monitor

will disable the monitor,

‘Jkrn On Monitor

will enable it.

Hide Legend

will hide the description of the displayed probes,

while Show Legend will

display them on

the top of the window.

Show Grid

will display a grid,

Hide Grid

will make it invisible.

Monitor Config

will open a dialog for configuration.

List of Probes

will change the list of displayed probes.

Figure 9.3.1: Oscillogram Configuration Dialog