User guide

GEI-100340
exe2
Description
This block permits the execution of branches, that is a group of blocks connected to each other through
connecting lines, as a function of the status of input port z, 0= not-performed branches, l= performed
branches.
The branch has to be connected to one of the input ports a..b .
If the exe block is enabled, the execution sequence of branches will be as follows:
1” branch connected to input port a.
2” branch connected to input port b.
In any case, the value read by input port a,b is lost.
From output port o the status of input port z is issued.
Input ports
name type alternative type function
Z int
Block enabler:
== 0 The branch connected to input ports a,b are not performed.
= 1 The branch connected to input ports a,b are pexfomxd.
float
int 1” branch to be performed
float int 2’ branch to be performed
woo42
Output ports
name type
alternative type function
0 int
status of input port z
woo43
See also: exel, exe4, exe8
66