User guide

WintDrive
exe4
2
a
i
b
c
a
Description
This block permits the execution of branches, that is a group of blocks connected to each other through
connecting lines, as a function of the status of input port z, 0= not-performed branches, l= performed
branches.
The branch has to be connected to one of the input ports a..d .
If the exe block is enabled, the execution sequence of branches will be as follows:
1” branch connected to input port a.
2” branch connected to input port b.
. .
4” branch connected to input port d.
I II any case, the value read by input port a..d is lost.
From output port o the status of input port z is issued.
Input ports
name type alternative type function
Z int Block enabler:
== 0 The branches connected to input port a..d are not performed.
== 1 The branches connected to input port a..d are performed.
a float irlt lo branch to be performed
b float int 2’ branch to be performed
C float int 3’ branch to be performed
d float int 4’ branch to be performed
woc4l
Output ports
name type alternative type function
0 int 1 Status of input port 2
See also: exel, exe2, exe8
67