User guide

GEL100340
exe8
Description
This block permits the execution of branches, that is a group of blocks connected to each other through
connecting lines, as a function of the status of input port z, 0= not-performed branches, l= performed
branches.
The branch has to be connected to one of the input ports a..h .
If the exe block is enabled, the execution sequence of branches will be as follows:
lo
branch connected to input port a.
2” branch connected to input port b.
8” branch connected to input port h.
In any case, the value read by ‘input port a..h is lost.
From output port o the status of input port z is issued.
68