Owner manual

O-14 Configurable Control Word CTW

Option: Function:

Selection of control word bit 10 if it is active low or active high

[0] None

[1] * Profile default

[2] CTW Valid, active low

O-50 Coasting Select

Option: Function:

Select control of the coasting function via the terminals (digital input) and/or via the network.

[0] Digit Input Activates Start command via a digital input.

[1] Bus Activates Start command via the serial communication port or network option module.

[2] Logic AND Activates Start command via the network/serial communication port, AND additionally via one of the

digital inputs.

[3] * Logic OR Activates Start command via the network/serial communication port OR via one of the digital inputs.

NB!

This parameter is active only when par.O-01 Control Site is set to [0] Digital and control word.

O-51 Quick Stop Select

Select control of the Quick Stop function via the terminals (digital input) and/or via the network.

Option: Function:

[0] Digital Input

[1] Bus

[2] Logic AND

[3] * Logic OR

NB!

This parameter is active only when par.O-01 Control Site is set to [0] Digital and control word.

O-52 DC Brake Select

Option: Function:

Select control of the DC brake via the terminals (digital input) and/or via the network.

[0] Digit Input Activates Start command via a digital input.

[1] Bus Activates Start command via the serial communication port or network option module.

[2] Logic AND Activates Start command via the network/serial communication port, AND additionally via one of the

digital inputs.

[3] * Logic OR Activates Start command via the network/serial communication port OR via one of the digital inputs.

NB!

This parameter is active only when par.O-01 Control Site is set to [0] Digital and control word.

OPCEIP EtherNet/IP