Owner manual

EN-95 Broadcast Storm Filter

Option: Function:

Applies to par. EN-94; if the Broadcast Storm Protection should also include Multicast messages.

[0] Broadcast only

[1] Broadcast & Multicast

EN-98 Interface Counters

Option: Function:

Read only. Advanced Interface counters, from build-in switch, can be used for low-level trouble-shooting,

The parameter shows a sum of port 1 + port 2.

[0] In Octets

[1] In Unicast Packets

[2] In Non-Unicast Packets

[3] In Discards

[4] In Errors

[5] In Unknown Protocols

[6] Out Octets

[7] Out Unicast Packets

[8] Out Non-Unicast Packets

[9] Out Discards

[10] Out Errors

EN-99 Media Counters

Option: Function:

Read only. Advanced Interface counters, from build-in switch, can be used for low-level trouble-shooting,

The parameter shows a sum of port 1 + port 2.

[0] Alignment Errors

[1] FCS Errors

[2] Single Collisions

[3] Multiple Collisions

[4] SQE Test Errors

[5] Deferred Errors

[6] Late Collisions

[7] Excessive Collisions

[8] MAC Transmit Errors

[9] Carrier Sense Errors

[10] Frame Too Long

[11] MAC Receive Errors

OPCEIP EtherNet/IP