Instruction Manual

Evolution Series E9000 Installation & Maintenance Guide

Ordering Additional or Replacement Parts

The following information is needed for supplying the

proper equipment:

1. All data on the motor control center master nameplate

2. If the unit is to be a duplicate of an existing unit, all

data on that unit’s nameplate, located on the right

side of the unit

3. NEMA control center class: I or II

4. NEMA wiring type: A, B or C

5. NEMA enclosure type: 1, 1 Gasketed, 2, 3R or 12

6. Power supply characteristics:

• Voltage

• Number of phases

• Frequency in Hz

7. Control power voltage and frequency in Hz

8. Nameplate designation and title

9. Motor characteristics:

• Horsepower rating

• Speed in RPM

• Temperature rise in °C

• Full-load current in amperes

• Accelerating time in seconds

• Service factor

10. Disconnect characteristics:

• Fusible switch rating (A), fuse type, and clips

• Circuit breaker frame size and current rating (A)

11. NEMA starter size: 1, 2, 3, 4, 5, 6 or 7

12. Starter type: FVNR, FVR, RVNR, 2-speed winding

and accessories:

• Push buttons: start-stop, forward, reverse, up, down

• Transfer switch: H-O-A

• Pilot lights: quantity, color and type

• Interlocks: quantity of NO and NC

• Control power transformer

13. Unit X height or space available

14. Are horizontal shelves or other parts required?

15 Circuitry

16. All other modifications

Other Information

For other information, refer to the nearest GE sales

office and give full details, including equipment name-

plate data. Nameplates are prominently displayed on

the motor control center lineup and contain such

details as service, voltage, frequency, factory order

number. Similar nameplates are mounted on each

motor control center unit.