Owner's manual

ManualsBrandsGE Industrial Solutions ManualsEquipmentGalaxy Pulsar Edge

131

132

133

134

135

136

137

138

139

140

Galaxy Pulsar Edge Power System Controller

Issue 3 October 2011 139

Factory Defaults

Using any FTP client, perform the following steps to load default web pages:

1. Type: FTP x.x.x.x ( The controller should have a Working IP Address of 192.168.2.1).

ftp 192.168.2.1

Connected to 192.168.2.1

220 841 FTP Ready

2. Login as guest using the using the network administrator password (administrator).

User (192.168.2.1:(none)): guest

331 User name okay, need password

Password: administrator

230 Logged in

3. Change directory (cd) to the dflts directory by typing: cd dflts.

ftp> cd dflts

250 CWD command successful

4. Use the put command to copy the web pages to the controller.

ftp> put cp841-dflts.bin

200 Port command okay

150 Opening data connection for STOR (192.168.2.1,1576)

5. Verify the transfer by a message displayed indicating a successful file transfer.

226 File sent OK

ftp: 917504 bytes sent in 2.31Seconds 396.50Kbytes/sec.

6. Type bye to exit the FTP session.

ftp> bye

221 Goodbye!

Application Software

Using any FTP client, perform the following steps to load Application Software:

1. Change your directory to the PC directory where the Application code is stored.

2. Type: FTP x.x.x.x ( The controller should have a Working IP Address of 192.168.2.1).