Owner's manual
Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011 145
following command:
ope dc1,stt=“boost”
The tables below summarize the object-attribute pairs in the system along with the commands
that can be used with the pair and the valid range that the attribute may have. The values in bold
text are the default settings for the attributes.
Objects, Attributes, and Related Commands
PSM- Power System
Related
Commands
obj,attr
description
sta
cha
ope
type
Range of Values
ps1,ide
Identifier
text
PS1
ps1,des
Power system description
text
≤ 32 characters
ps1,sid
Site ID
text
Up to 20 characters
ps1,sde
Site Description
text
Up to 55 characters
ps1,sys
System Description
text
Up to 55 characters
ps1,swv
Software version
text
d.d
ps1,verw
Web pages version
text
d.d
ps1,verb
Boot block version
text
d.d
ps1,verd
Display version
text
d.d
ps1,dflt
Defaults version
text
d.d
ps1,brc
Board code
text
“”
ps1,sn
Serial number
text
YYLLdddddddd
ps1,dow
Day of week
Text
Sunday…Saturday
ps1,dat
Date
date
format matching ps1,dtf
ps1,dtf
Date format
text
mm-dd-yyyy, dd-mm-yyyy,
yyyy-mm-dd
ps1,tim
Time
time
hh:mm
ps1,tmf
Time format
number
12, 24
ps1,dls
Daylight savings enable
number
0=disabled 1=enabled
ps1,tzo
Time zone offset
number
-840 - +840 minutes (±14
hours)
ps1,lng
Language
text
ENGLISH, OTHER
OPE changes the
descriptions
ps1,tun
Temperature units
text
C, F
Ps1,cem
Critical equals major
number
0=disable, 1=enable
ps1,fpc
Front panel configuration
number
0=disable, 1=enable
ps1,rrf
Remote rectifier off
number
0=disable, 1=enable
ps1,poe
Power off enable
number
0=disable, 1=enable
ps1,usl
Uninstall missing equipment
number
1
ps1,usr
Username enable
number
0=disable, 1=enable
ps1,dct
Display contrast
number
0 – 100 %
ps1,ptt
Communication port type
text
“LOCAL”,”MODEM”
ps1,amt
System ambient temperature
number
dd
°
C
ps1,fst
Factory defaults
text
See ps1,fstl
ps1,fstl
Factory defaults list
text
Comma delimited list of
defaults
ps1,rap
Reset Passwords
number
1 = reset passwords (OPE
only valid from local