Owner's manual

Galaxy Pulsar Edge Power System Controller

Issue 3 October 2011 48

Port

Description

Front Panel

Serial Craft

ports

A laptop PC can be connected to standard DB9 connector J6 to provide a

ground-referenced RS-232 serial or to the available minis series-

B USB

connection on certain configurations for local craft access. EasyView 2 or the

T1.317 command line can be used to facilitate this access. Controller with

RS232 ports can also be configured and used with external modems.

Rear

Applications utilizing the Galaxy Pulsar Edge controller provide a standard RJ-

45 Ethernet connector, J5, to access the integrated 10/100 Base-T network

connection. This connection can be at the rear or at the front of the system as

hown. It can be used for remote monitoring or as a local Craft port. In the

remote monitoring applications, Lineage Power

Galaxy Manager or other

SNMP based programs used for web-

based remote access and network

management can be used.

Front Panel Menu Structure

Feature content at the front panel is functionally divided at the Galaxy Pulsar Edge’s Main Menu

RS232

USB

Rear Access

Front Access

RS232

USB