Instruction Manual

Pulsar Plus Controller Family
Issue 7 December 2011 180
Table D-1 Standard Configuration Item Defaults
Factory Default
Factory 24V
Rectifier
Default
Factory 48V
Rectifier
Default
Category Description Range Factory Factory 24V Factory 48V obj,attr
Local RS-232 handshaking (Flow
Control)
No/SW/HW "NO" LP1,HSH
Number of Local RS-232 data bits 7,8 8 LP1,DBT
Local RS-232 parity n,e,o N LP1,PRY
Number of Local RS-232 stop bits 1,2 1 LP1,SBT
Local RS-232 Time-out 0-45 minutes 5 LP1,TMO
Local RS-232 Application
TERMINAL,
EVENT LOG
"TERMINAL" LP1,APP
Modem Port Write Access
1=Enabled
0=Disabled
1 MP1,WRE
Modem baud rate 2400/4800/ 9600 "2400" MP1,BDR
Number Of Modem data bits 7,8 8 MP1,DBT
Modem parity n,e,o N MP1,PRY
Number Of Modem stop bits 1,2 1 MP1,SBT
Modem Time-out 0-45 minutes 5 MP1,TMO
Modem initialization string ≤ 20 Characters "AT&FEV&C1S0=0H" MP1,INS
Modem number of rings before
answering
1 to 9 1 MP1,NRG
Modem handshaking (Flow Control) No/SW/HW "NO" MP1,HSH
Network Port
DHCP
0=static
1=client
2=server
1 NET1,DHCP
Timeout 0 to 45 minutes 10 NET1,TMO
Network Port Write Access
1=Enabled
0=Disabled
1 NET1,WRE
Standard Alarms
Alarm Delay 0 to 9 minutes 0 SDA,DLY
Notify On Occur
1=Enabled
0=Disabled
0 SDA,NOO
Notify On Retire
1=Enabled
0=Disabled
0 SDA,NOR
Nag On Occur
1=Enabled
0=Disabled
0 SDA,NAG
Notify Destination "" SDA,DST
Single Threshold
Alarms
Alarm Delay 0 to 9 minutes 0 THA,DLY
Notify On Occur
1=Enabled
0=Disabled
0 THA,NOO
Notify On Retire
1=Enabled
0=Disabled
0 THA,NOR
Nag On Occur
1=Enabled
0=Disabled
0 THA,NAG
Notify Destination "" THA,DST
Dual Threshold
Alarms
Alarm Delay 0 to 9 minutes 0 DTA,DLY
Notify On Occur
1=Enabled
0=Disabled
0 DTA,NOO
Notify On Retire
1=Enabled
0=Disabled
0 DTA,NOR
Nag On Occur
1=Enabled
0=Disabled
0 DTA,NAG
Notify Destination "" DTA,DST
Alarm Call-Out
Nag Interval 15 to 60 minutes 15 CM1,NGI
Call-Out Destination Type data or pager "DATA" COP,TYP
Call-Out Phone Number up to 25 Characters "" COP,PHN
Call-Out Baudrate
300, 1200, 2400,
4800, 9600, 19200
2400 COP,BDR
Call-out Data Bits 7 or 8 8 COP,DBT