Instruction Manual

Pulsar Plus Controller Family
Issue 7 December 2011 46
Basic Controller Configuration
Step Action
1 Change the battery type to another battery type or specific model.
From the front panel go to Menu

Configuration

Batteries

Type and select a battery model
from the list. If the battery model is unique, select a generic technology class for the installed
battery or use the Craft port to enter a specific battery model. A new model can be entered into
the controller through the use of the web pages at Settings

Battery Types. Note: the present
controller can store 20 specific batteries. One may have to be deleted before adding.
Specific battery models stored in the standard controller:
• 12A100FT
• 12A150FT
• 12IR150/150LP
• 3A125-33L
• 3A95-21L
• 3A95-27L
• 3A95-33L
• 6A95-13L
• 6A95-15L
• IR30EC
• IR40EC
• L54V63FTX
• NCX-125
• NCX-80
• NSB110FT
• NSB170FT
• NSB60FT
• SE48S63
• SE48S80
• TEL12-105F
Generic Battery technologies:
• Valve-Regulated Lead Acid (Valve-Reg)
• Flooded Lead Acid (Flooded)
• Lithium Metal Polymer (Li-LMP)
• Lithium ELiTE (Li-ELiTE)
• Nickel-Cadmium (Ni-Cd)