Instruction Manual

Pulsar Plus Controller Family
Issue 7 December 2011 54
Front Panel Controls and Status Display - Pulsar
Controls - Pulsar
Pulsar controllers have six tactile buttons for navigation through a structured menu system. The buttons
serve multiple purposes depending on the active screen. These functions are summarized below.
Navigation Controls - Pulsar
Buttons
Description
Display Contrast
In the Main Display, the ▲▼ buttons increase or decrease the display
contrast.
Contrast adjustment is also available through the menus at
Menu

Configuration

System Settings.
Parameter
Change
When changing a system parameter, the
▲▼
buttons increase or
decrease the value of the parameter.
Direction Buttons
In the Menus, the
◄▲▼► direction buttons navigate to make a
selection. A black box highlighting a menu item indicates that the item
has sub-menus.
Enter Button
Enters a sub-menu or confirms a parameter change. From the Home
Page only, goes to the top level Main menu.
ESC Button
Goes up one menu level or exits a parameter change without saving.
Figure 6: front Panel - Pulsar
Voltage
Test Jacks
Menu
Navigation
RS-232 and Ethernet
Ports to plug in a PC
to use Web Pages
Status LEDs
LCD
Display
Pulsar