Instruction Manual

Pulsar Plus Controller Family
Issue 7 December 2011 57
Front Panel Controls and Status Display - Phoenix
Controls - Phoenix
Phoenix controllers have a rotary control knob and a button for navigation through a structured menu
system. The rotary control knob serves multiple purposes depending on the active screen. These functions
are summarized below.
Navigation Controls - Phoenix
Control Description
Rotary Control
Menus navigate to make a selection. A black box highlighting a
menu item indicates that the item has sub-menus
Parameter increase or decrease the value of the parameter
Rotary Control
Knob – Press to
Enter Button
Enters a sub-menu or confirms a parameter change. From the Home
Page only, goes to the top level Main menu.
Back / Home
/ESC Button
Goes up one menu level or exits a parameter change without saving.
Shift between digits of multiple digit configuration settings values.
Alarm Cut Off
(ACO) Button
Silences active audible alarm.
Figure 7: Front Panel - Phoenix III
Status LEDs - Phoenix
Phoenix controller displays provide 24 LED indicators to indicate system status. Six LEDs are dedicated to
specific stares. The other eighteen have factory assigned defaults as indicated in the table below and their
assignments to alarms may be customized in the field using the remote interfaces.
Voltage
Test Jacks
Menu
Navigation
Status LEDs
RS-232 and Ethernet
Ports to plug in a PC
to use Web Pages
Phoenix III
LCD
Display