Datasheet

Lighting

DATA SHEET

LED 2D

Product information Features

Speciﬁcation Features

Long life

• 40,000 hours rated life (L70)

• Lasts 2.5-3x longer than typical CFL 2D lamp

High efﬁciency

High Quality lighting effect

• High uniformity of light, create elegant lighting atmosphere

for hospitality & commercial applications

• Available with a CRI of 80

Environmentally Conscious

• Energy efﬁcient lamp that contain no lead or Mercury

Application areas

Ofﬁce

Hospitality

• Energy Saving up to 60% versus CFL 2D lamps

• High light output of 750-1550 lumens

• Available in 2700, 3500 and 4000K and also in 3000K for 6.5W

• Optimized beam angle: 120° x 130°

• 12.5W ECG design is compatible with main Electronic ballast

types, but please visit below website for list of ballasts tested and

approved for compatibility:

www.gelighting.com/LEDPlugIn-compatibility

• A+ energy efficiency rating

• Uses 60% less energy than 16W CFL 2D and 55% less energy

than 28W CFL 2D

• Outstanding efficiency up to 128lm/w

• Advanced optics to deliver good light distribution

• High color consistency of <6 steps

GE’s LED 2D lamp offers safe, reliable and affordable energy

saving alternative to CFL 2D lamps used in bulkhead fixtures. GE’s

new LED 2D lamps can offer direct retrofit replacement for 16W

2Pin 2D lamps operated on Magnetic ballast, 28W 4Pin 2D lamps

operated on Magnetic and Electronic ballast (separate designs).

This replacement can be completed simply without tools or costly

upgrade and the robust middle part will ensure easy handle

during installation. The upgraded fixture will deliver huge energy

saving and reduced operating cost driven by the increased life

and the classic 2D shape with great light distribution will ensure

satisfaction for end-users.

PAGE 1
DATA SHEET GE Lighting LED 2D Product information Features GE’s LED 2D lamp offers safe, reliable and affordable energy saving alternative to CFL 2D lamps used in bulkhead fixtures. GE’s new LED 2D lamps can offer direct retrofit replacement for 16W 2Pin 2D lamps operated on Magnetic ballast, 28W 4Pin 2D lamps operated on Magnetic and Electronic ballast (separate designs).
PAGE 2
IEC standards EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting EN 61000-3-2 EN 61000-3-3 EN 61547 Limits for harmonic current emissions (equipment rated current <=16A) Limitation of voltage fluctuations and flicker in low voltage supply systems (equipment rated current <=16A) Specification for equipment for general lighting purposes.
PAGE 3
Dimensions for 2D2P Plug-In [mm] 136 17.5 Dimensions for 2D4P Plug-In [mm] 201 22.6 9.9 188 132 9.9 Operation and maintenance Store and use the lamps the same way as standard compact ﬂuorescent lamps. • Lamps should be kept free from contamination. • Switch off mains supply before installing/removing lamp. • Good condition of the lamp-holder contacts is important to ensure proper operation of lamp. • Lamp can’t be operated directly from Mains voltage. • For 12.