Owner's Manual
Table Of Contents
- Wire-Free Smart Switch Installation Guide
- Simple DIY Setup
- Compatibility Requirements
- Included
- Location & Mounting Type
- Installing Your Switch (mounting with adhesive tape)
- Installing Your Switch (mounting with screws/single-gang wallplate)
- Installing Your Switch (mounting with screws/2-gang wallplate)
- What You Can Do With Your Switch
- Removing/Replacing the Battery
- Additional Information & Warnings
- FCC Radiation Exposure Statement
- Installation & Set Up
STEP
2 Alternative Mounting
Installing Your Switch
(mounting with screws/2-gang wallplate)
IMPORTANT Start
by
removing the clear plastic
tab
from the back
of
the switch.
1.
Remove existing
wallplate
2.
Get
multi-gang
wallplate
(purchased separately).
3. Use
new
wallplate
to
mark
the
location
for
holes
to
be
drilled.
I.e.
Using 7
/32"
bit,
drill
holes in wall
for
mounting
screws.
Insert
drywall
anchors.
5. Secure
the
switch
to
the
wall until level
and
flush.
6. Screw
on
the
faceplate
cover
onto
the
bracket.
12
For Help,
Go
To
: cbyge.com/wirefree-support
or
call 1-8Ltlt-30C-BYGE