User's Manual

05-3946A01, Rev. C TransNET OEM Integration Guide 37
RXTOT [NONE, 0–1440]
Details, page 51
Maximum duration (in minutes) before time-out
alarm. Default is OFF.
RTU [ON, OFF, 0-80]
Details, page 51
Enable or Disable unit’s built-in RTU 
simulator. Default is OFF. Set RTU address
between zero and 80.
SLEEP [ON, OFF]
Details, page 54
Enable or Disable the radio’s energy-conservation
Sleep mode function.
UNIT [10000–65000]
Details, page 55
Unit address used for network-wide 
diagnostics. (Unique within associated network.)
XADDR [0–31]
Details, page 55
This unit’s Extended address
Typically, the Master is set to zero (0).
XMAP [00000000-FFFFFFFF]
Details, page 55
Included Extended units in MODE X. 
(Extensions and Remotes only)
XPRI [0–31]
Details, page 56
Address of the primary Extended radio unit
(Extension).
XRSSI [NONE, –40...–120]
Details, page 56
Minimum RSSI level required to preserve syn-
chronization with a non-primary radio. 
(Only meaningful when XPRI is not NONE)
ZONE CLEAR
Details, page 56
Reset zone data statistics
Table 16. Operating Status—Display Only
Command Description
ADDR
Details Page 40
Network address
AMASK
Details Page 41
Alarm mask (response)
ASENSE
Details Page 41
Current sense of the alarm output.
BAUD
Details Page 41
Data communication parameters. Example: BAUD
9600 8N1
BUFF
Details Page 42
Data buffering mode: ON = seamless data, OFF =
fast byte throughput
CODE
Details Page 42
Security/encryption operational status.
“NONE” (Inactive), or “ACTIVE”
Table 15. Operational Configuration—Set/Program (Continued)
Command Description