User's Manual

38 TransNET OEM Integration Guide 05-3946A01, Rev. C
CTS
Details Page 43
CTS delay in milliseconds (0–255 ms)
CTSHOLD
Details Page 43
“Hold time” that CTS is present following last
character from DATA port.
DEVICE
Details Page 44
Device behavior
Alternatives: DCE and CTS KEY
HOPTIME
Details Page 45
Hop-time value in milliseconds (ms).
LPMHOLD
Details Page 48
Time (0-1000 ms) provided to give an RTU time to
respond before the radio goes to sleep.
MODE
Details Page 48
Current operating mode:
M = Master
R = Remote
X = Extension (Repeater)
MRSSI
Details Page 48
Minimum RSSI level required to preserve synchro-
nization with a Master radio for Remotes in mobile
service.
OWM
Details Page 49
Owner’s message or site name
OT
Details Page 49
Status (ON/OFF) of the 1-second delay on delivery
of RXD serial data.
OWN
Details Page 49
Owner’s name or system name
PORT
Details Page 49
Current data port (DATA connector) interface sig-
naling mode: RS232 or RS485
PWR
Details Page 49
Forward power-output setting in dBm
REPEAT
Details Page 50
The fixed downstream re-send count.
RETRY
Details Page 50
The maximum upstream re-send count for ARQ
(Automatic Repeat Request) operation.
RSSI
Details Page 50
Received signal strength indicator (in dBm).
Unavailable at Master unless SETUP is enabled.
RTU
Details Page 51
RTU simulator’s operational status (ON/OFF)
Table 16. Operating Status—Display Only (Continued)
Command Description