User's Manual

TRAIN CHIEF® II LRCS w/Lightweight OCU OWNER’S MANUAL
95-00-0-xxx Rev 000 6-8 Control Chief Corporation
9 2-LINE x 8-CHARACTER DISPLAY: LED Dot Matrix displays system status messages.
Two intensity levels depending on ambient light sensor. The display provides the operator
with the following information:
General Display Message Description
Manufacturer ID
Hardware Status
Unit Serial Number
Firmware Version
At Power On
Battery Condition
Locomotive Running Number (typically a four digit number)
Pitch & Catch Assignment (A or B)
OCU Infrared Registration
Acknowledgement
Network Info (Protocol and RCL operating Mode)
Hardware Status (memory fault, program fault, others)
Battery Conditions
Error Conditions
RF Diagnostics
Below the 2-line 16 char LED Dot Matrix Display are four push buttons. These push buttons
are used for OCU configuration and diagnostics. Future use is for specialized user
applications, such as, initiating a remote switch actuation or other auxiliary track side
application.
10 EMERGENCY STOP DESIGNATOR: Indicates E-Stop button location.
11 OCU A-B INDICATORS: Indicates OCU designation (A or B).
12 AMBIENT LIGHT SENSOR: Used to automatically adjust backlighting, indicators, and
display brightness.