User's Manual

TRAIN CHIEF® II LRCS w/Lightweight OCU OWNER’S MANUAL
95-00-0-xxx Rev 000 1-2 Control Chief Corporation
The Installation Kit
In order to effectively and reliably interface to the locomotive controls / operations, various kitted
items are provided to complete the installation. An antenna kit is provided with the components
necessary to allow the radio antenna to be mounted on the locomotive cab. Surge suppressors
are provided for installation on all inductive devices (i.e. solenoid coils, electrical contactor coils,
etc.) to minimize electro magnetic interference (EMI). Optional color-coded xenon strobe
indicator lights can be supplied to provide visual status indication to personnel during remote
control operation.
The Lightweight OCU-BTIND
The Lightweight OCU model DBT is specifically designed for industrial locomotive operations.
The model DBT is designed to meet the demanding requirements of locomotive operators by
providing an operator control unit that is easy to use, safe, rugged, dependable, and based on a
commonly recognized configuration. The Lightweight OCU meets these requirements with an
ergonomic shape that eliminates sharp corners and accommodates an easy reach of all control
switches. These features provide an intuitive operation scheme enabling operators to maintain
their focus on yard movements.
Figure 1-2: Lightweight OCU –Brake & Throttle Industrial configuration
Reference Drawings
The system drawing package contains the following typical drawings, which are referenced
throughout this document. These drawings will be specific to your system with exact
configuration details.
Note: “XXXX” references a Control Chief assigned system serial number.
Typical Drawing List
DRAWING NUMBER DESCRIPTION
E-9568-00-1 OCU ASSEMBLY / LAYOUT
E-9568-03-1 RECEIVER / CONTROLLER LAYOUT
E-9568-31-1 THRU -9
E-9568-33-1 AND E-9568-41-1 ELECTRICAL WIRING
E-9568-53-1 PNEUMATIC INTERFACE
E-9568-91-1 SYSTEM ACCESSORIES
E-9568-99-1 COMMUNICATIONS CONFIGURATION