User's Manual

TRAIN CHIEF® II LRCS w/Lightweight OCU OWNER’S MANUAL
95-00-0-xxx Rev 000 9-3 Control Chief Corporation
Control Chief Recommended Operator Training Outline
Purpose
The purpose of this outline is to provide a guideline to help ensure operators are provided with
a working knowledge of the remote control system. This guideline is not intended to qualify
anyone as a certified operator and should be adapted to meet the needs of the customer and
to cover applicable system options.
Overview
Provide a basic understanding of remote control operation and the basic components of the
system. This should include, but not be limited to:
¾ Basic remote control operation: Discuss the concept and benefits of being able to
operate equipment by remote control.
¾ Operational safety:
Explain the need to ensure the path of travel is clear and the
need to keep the equipment in sight while operating the remote control. Discuss
local safety procedures and policies. Explain that Control Chief does not
supersede
any local safety policies.
¾ Basic system components:
Explain and identify the basic system components
including the OCU, receiver, batteries, and battery charger.
¾ Basic safety features:
Explain the basic safety features of the system such as the
effects of radio interference, loss of signal, and communication security.
System Specific Components
Provide a detailed explanation of the specific components of the system. This should include,
but not be limited to:
¾ OCU:
Explain the specific components and operation of the OCU including:
1. Batteries: Explain operational capabilities, charging, proper care, and installation
of the batteries.
2. Switches: Explain the purpose of all installed switches including key switches, E-
Stops, directionals, throttle/brake, trainline brake, horn, sand, uncouple and
headlights. Explain the operation of locking and spring loaded switches.
3. Indicators: Explain the purpose of installed indicator lights and displays.
4. Antenna: Explain the purpose and care of the installed antenna.
5. Safety Features: Explain the built in safety features of the OCU, including tilt
switch and tilt bypass, dead man timeout, spring loaded and locking switches
6. Start-up and Shutdown: Provide detailed instruction on proper start-up and
shutdown procedures for the OCU with emphasis on proper switch settings and
emergency shut down procedures.