User Manual

26 MDS entraNET 900 System Guide (Preliminary) MDS 05-4055A01, Rev. A
Invisible place holder
Figure 2-8. Device Information Menu
• Model Number (Display only)
• Serial Number (Display only)
• Hardware Version (Display only)
• Firmware Version (Display only)—Current firmware
installed and being used by the transceiver.
• Uptime
(Display only)—Elapsed time since powering up.
• User Password—Password for gaining access to the entra-
NET Management System from remote locations (over-the-air
or LAN) and for changing parameters settings. Use this menu
item to change the password. [admin]
This menu item is always accessible via a terminal connected to
the COM1 Port, and via Telnet if access enabled in the unit’s
Security Configuration Menu (Page 42).
• Device Names Menu—Fields used at user’s discretion for
general administrative purposes. The Device Name field is used
by the transceiver as the “Realm” name for network security and
in the entraNET MS screen headings. (See Figure 2-9 on
Page 27)
• Date—Current date being used for the transceiver logs.
User-setable. (Value lost with power failure if SNTP (Simple
Network Time Protocol) server not accessible.)
• Time—Current time of day. User-setable.
Setting: HH:MM:SS
(Value lost with power failure if SNTP server not accessible.)
• Date Format—Select presentation format:
• Generic = dd Mmm yyyy
• European = dd-mm-yyyy
• US = mm-dd-yyyy