User Manual
80 MDS entraNET 900 System Guide (Preliminary) MDS 05-4055A01, Rev. A
NOTE: Access to the entraNET’s Management System and changes to
some parameters, are controlled by password when accessing
by means of a Web browser or Telnet.
A unique IP address and subnet are required to access the browser-based
entraNET Management System through the
LAN port.
Table 3-1. Basic Configuration Defaults (AP)
Item Mgt. System Location Default Values/Range
Network Name Main Menu>
Network
Configuration>
Network Name
“Not Programmed”•1–15 alphanumeric
characters
• Case-sensitive;
can be mixed case
IP Address Main Menu>
Network
Configuration>
IP Address
192.168.1.1 Contact your network
administrator
Subnet Mask
Net Address
RF Output
Power
Main Menu>
Radio Configuration>
RF Power Output
+30 dBm (1.0 Watt) 20–30 dBm @ 50Ω
(0.1–1.0 Watts)
Unit Password Main Menu>
Device Information>
User Password
admin
(lower case)
• 1–8 alphanumeric
characters
• Case-sensitive;
can be mixed case
Table 3-2. Basic Configuration Defaults (Remote)
Item Mgt. System Location Default Values/Range
Payload
Radio
Remote IP
Address
Unit ID
Mode
Local IP Port
Remote IP Port
Network Name Main Menu>
Network
Configuration>
Network Name
“Not Programmed”•1–15 alphanumeric
characters
• Case-sensitive;
can be mixed case
IP Address Main Menu>
Network
Configuration>
IP Address
192.168.1.1 Contact your network
administrator