User Manual

MDS 05-4055A01, Rev. A MDS entraNET 900 System Guide (Preliminary) 123
KEY1=<string of bytes>key 1
KEY2=<string of bytes>key 2
KEY3=<string of bytes>key 3
IV=<integer> current IV
CMD=<0|1> dump command line format
REPROG
Syntax: REPROG [optional arguments as follows]...
START=<hex> Start address of Flash reprogramming process.
SIZE=<hex> Number of reprogramming bytes to be downloaded.
H2H
Syntax: H2H [optional arguments as follows]...
PROT=<choices>
LCP_ONLY ;LCP, no network or H2H layer
H2H_ONLY ;H2H but no Network layer
H2H_NETWORK ;Full H2H/Network protocol
CMD=<0|1> dump command line format
VER
Syntax: VER [optional arguments as follows]...
IMAGE=<integer> Currently active image: 1 or 2
SREV=<string> Current Software Version number. xx.yy.zz
SWID=<string> Current Software ID text. 06-nnnnAnn
XSREV=<string> Current Radio Software Version number.
xx.yy.zz
H2H=<integer> Host to Host protocol version number.